Sr. QA Technician
One of our top clients, a leading global Medical Device manufacturer developing high value and high impact medical device products has multiple excellent opportunity for Sr.
QA Technician to work onsite in Elkton, MD office.
HIRING multiple contractors to supporting design control activities via EUMDR requirements.
These opportunities are long-term (12-24 months) /full-time (40 hours/week) contract opportunities based on W2/1099/Corp-to-Corp.
If you are interested in aligning with a highly regarded organization that values quality and integrity and fosters an environment where teamwork and professionalism thrive, then don't hesitate to contact us at rchu@gesnetwork.
com or and call Rose Chu, VP in Pharmaceutical & Biotech Services Group at #610-822-1256 for questions.
We are always interested in talking to candidates for current AND future opportunities! Please respond directly to Global Employment Solutions, Inc.
at rchu@gesnetwork.
com with your resume attached -WORD document.
Job
Summary:
The New Product Development (NPD) Test & Evaluation Technician position is Responsible for the preparation and testing of pre-production devices to support the product development process.
Responsible for testing support of competitor product evaluations for marketing information.
Assisting in preparing the lab for simulated clinical evaluations and new product pilot lines is also included in the position.
Supporting the acquisition, calibration and validation of lab equipment.
Job Details:
Associate is responsible to follow requirements of Quality System; including document/data control, compliance with procedures, and change control practices.
Perform basic product testing on prototype, pre-production, and/ or final design products.
Testing performed typically includes use of equipment such as:
measuring dimensions using pin gauges, laser micrometers, rulers, length gages, protractors, measuring microscopes, Instron testing, bench testing using small or large fixtures or jigs, visual inspection, lubricity and durability testing, and packaging / shipping distribution equipment Tabulate experimental data utilizing statistical programs.
Assists in compiling technical reports and summaries.
Perform test method validation testing as defined by a protocol Perform general calibrations as necessary.
Lock out/ Tag out general equipment as necessary Perform general Installation Qualification testing per protocol for laboratory equipment.
Maintain a lab notebook Ensure development lab and equipment is organized and maintained at usable levels Knowledge, Skills and Abilities Requires a high school diploma.
Post high school education beneficial but not required.
2-5 years medical device industry experience.
Prior technical engineering, quality assurance, or manufacturing support experience is required.
Ability to use testing equipment (ie calipers, micrometers, microscope, optical comparator, Instron, Laser Mic, Lubricity Tester, etc.
).
Requires a logical thought process and decision making ability to make product acceptability choices based upon quality criteria, engineering criteria, testing results and product requirements.
Mathematical knowledge and aptitude, including algebra and utilization of sampling plans/statistical charts.
Keywords:
Medical device QA Technician, Test & Evaluation Technician, NPD Test Technician, product development process, testing support of competitor product evaluations, simulated clinical evaluations, new product pilot lines, Supporting the acquisition, calibration and validation of lab equipment, Associate is responsible to follow requirements of Quality System; including document/data control, compliance with procedures, and change control practices, product testing on prototype, pre-production, design products, measuring dimensions using pin gauges, laser micrometers, rulers, length gages, protractors, measuring microscopes, Instron testing, bench testing using small or large fixtures or jigs, visual inspection, lubricity and durability testing, and packaging / shipping distribution equipment, Tabulate experimental data utilizing statistical programs, test method validation, Installation Qualification testing, lab notebook, technical engineering, quality assurance, or manufacturing support, testing equipments, calipers, micrometers, microscope, optical comparator, Instron, Laser Mic, Lubricity Tester We appreciate your understanding, in that; we will only be able to respond to those inquiries who meet the stated requirements.
To protect our client's interests, we will not be responding to inquiries that do not contain a CV/Resume.
Finally, please include the position ID (rc-QA Tech) in the subject line of your correspondence to ensure review.
Please forward your credentials in Word format, in confidence, to:
rchu@gesnetwork.
com Our clinical recruiter/manager will contact the qualified candidates IMMEDIATELY to set up interviews.
Rose Chu Rose Chu Vice President of Pharma, CRO, Biotech and Medical Device Services Ettain Group t:
610-822-1256 m:
215-317-2999 rose.
chu@ettaingroup.
com website facebook twitter linkedin instagram Best of Staffing(R) Diamond Award Winner Connect with me:
https:
//www.
linkedin.
com/in/rosechu/ Job Requirements:
3-5 yrs medical device industry technical engineering, quality assurance, or manufacturing support experience with testing equipment (ie calipers, micrometers, microscope, optical comparator, Instron, Laser Mic, Lubricity Tester.
Estimated Salary: $20 to $28 per hour based on qualifications.
QA Technician to work onsite in Elkton, MD office.
HIRING multiple contractors to supporting design control activities via EUMDR requirements.
These opportunities are long-term (12-24 months) /full-time (40 hours/week) contract opportunities based on W2/1099/Corp-to-Corp.
If you are interested in aligning with a highly regarded organization that values quality and integrity and fosters an environment where teamwork and professionalism thrive, then don't hesitate to contact us at rchu@gesnetwork.
com or and call Rose Chu, VP in Pharmaceutical & Biotech Services Group at #610-822-1256 for questions.
We are always interested in talking to candidates for current AND future opportunities! Please respond directly to Global Employment Solutions, Inc.
at rchu@gesnetwork.
com with your resume attached -WORD document.
Job
Summary:
The New Product Development (NPD) Test & Evaluation Technician position is Responsible for the preparation and testing of pre-production devices to support the product development process.
Responsible for testing support of competitor product evaluations for marketing information.
Assisting in preparing the lab for simulated clinical evaluations and new product pilot lines is also included in the position.
Supporting the acquisition, calibration and validation of lab equipment.
Job Details:
Associate is responsible to follow requirements of Quality System; including document/data control, compliance with procedures, and change control practices.
Perform basic product testing on prototype, pre-production, and/ or final design products.
Testing performed typically includes use of equipment such as:
measuring dimensions using pin gauges, laser micrometers, rulers, length gages, protractors, measuring microscopes, Instron testing, bench testing using small or large fixtures or jigs, visual inspection, lubricity and durability testing, and packaging / shipping distribution equipment Tabulate experimental data utilizing statistical programs.
Assists in compiling technical reports and summaries.
Perform test method validation testing as defined by a protocol Perform general calibrations as necessary.
Lock out/ Tag out general equipment as necessary Perform general Installation Qualification testing per protocol for laboratory equipment.
Maintain a lab notebook Ensure development lab and equipment is organized and maintained at usable levels Knowledge, Skills and Abilities Requires a high school diploma.
Post high school education beneficial but not required.
2-5 years medical device industry experience.
Prior technical engineering, quality assurance, or manufacturing support experience is required.
Ability to use testing equipment (ie calipers, micrometers, microscope, optical comparator, Instron, Laser Mic, Lubricity Tester, etc.
).
Requires a logical thought process and decision making ability to make product acceptability choices based upon quality criteria, engineering criteria, testing results and product requirements.
Mathematical knowledge and aptitude, including algebra and utilization of sampling plans/statistical charts.
Keywords:
Medical device QA Technician, Test & Evaluation Technician, NPD Test Technician, product development process, testing support of competitor product evaluations, simulated clinical evaluations, new product pilot lines, Supporting the acquisition, calibration and validation of lab equipment, Associate is responsible to follow requirements of Quality System; including document/data control, compliance with procedures, and change control practices, product testing on prototype, pre-production, design products, measuring dimensions using pin gauges, laser micrometers, rulers, length gages, protractors, measuring microscopes, Instron testing, bench testing using small or large fixtures or jigs, visual inspection, lubricity and durability testing, and packaging / shipping distribution equipment, Tabulate experimental data utilizing statistical programs, test method validation, Installation Qualification testing, lab notebook, technical engineering, quality assurance, or manufacturing support, testing equipments, calipers, micrometers, microscope, optical comparator, Instron, Laser Mic, Lubricity Tester We appreciate your understanding, in that; we will only be able to respond to those inquiries who meet the stated requirements.
To protect our client's interests, we will not be responding to inquiries that do not contain a CV/Resume.
Finally, please include the position ID (rc-QA Tech) in the subject line of your correspondence to ensure review.
Please forward your credentials in Word format, in confidence, to:
rchu@gesnetwork.
com Our clinical recruiter/manager will contact the qualified candidates IMMEDIATELY to set up interviews.
Rose Chu Rose Chu Vice President of Pharma, CRO, Biotech and Medical Device Services Ettain Group t:
610-822-1256 m:
215-317-2999 rose.
chu@ettaingroup.
com website facebook twitter linkedin instagram Best of Staffing(R) Diamond Award Winner Connect with me:
https:
//www.
linkedin.
com/in/rosechu/ Job Requirements:
3-5 yrs medical device industry technical engineering, quality assurance, or manufacturing support experience with testing equipment (ie calipers, micrometers, microscope, optical comparator, Instron, Laser Mic, Lubricity Tester.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
